What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Just about everyone has their personal assumption about Hot Water Heater Repair.
Lots of contemporary houses use an electrical hot water heater for their heater, because of its comfort as well as simplicity of use. Nevertheless, much like any other electrical appliances, problems may arise with its use, all of a sudden. It can be actually irritating to awaken to a chilly shower rather than a hot one or having your bath with water that isn't warm adequate or perhaps as well hot. Whatever the case may be, hot water heater troubles can be rather stressful. Thankfully, we've made a checklist of feasible services to your water heater issues. There are a variety of aspects that could cause most of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it fixed need to not present excessive of an issue if you adhere to these steps:
Check Your Power Supply:
As standard as this might seem, it is really needed. Without sufficient power, your hot water heater will not function. So the first thing to do when your water instantly stops working is to confirm that it isn't a power trouble. Inspect if the fuse is blown out or the breaker tripped. If the breaker is the issue, merely turn it off and on again. Change any kind of damaged or worn-out fuse. Examine the home appliance with power after these modifications to see if it's now functioning.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt having a look at your heating element if it is still functioning. Evaluate each of your heating elements to ensure the issue isn't with any of them. If any one of them is defective, change that component and then examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot sufficient, you might need to examine the temperature setups on your upper thermostat. Ensure the circuit breaker is turned off before doing anything. Open the accessibility panel and press the red switch for temperature reset over the thermostat. This should aid heat up the water. Transform the circuit breaker back on and also inspect if the trouble has been resolved.
Call An Expert:
If after changing all defective components as well as resetting your temperature level, the water heater still isn't functioning, you may require to contact a specialist plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of hot water needed in your house. Whatever the instance may be, an expert plumber would aid solve the issue.
Verdict
Water heater issues are not constantly major. Much of them are due to minor issues like a blown fuse or damaged burner. Replacing the malfunctioning components should work. Nonetheless, if you are still unable to fix the trouble, give a call to your nearest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our part on What Would Cause My Electric Water Heater to Stop Working?. Thanks for spending some time to read through our post. Liked our blog? Please share it. Let someone else check it out. Thank you so much for going through it.
Click
Report this page